E test!
#1
E test!
Well,1low03gt passed her etest tonight!!
the readings are as follows....
at 40 km/h...
HC ppm limit is 52,and we got 13
CO% limit is 0.29,and we get 0.00
NO ppm limit is 0385,and we get 3
for the curb idle...
HC ppm limit is 150,and we get 11
CO% limit is 0.7,and we get 0.69....Talk about close call on this one!!!!!!
Not bad for a cammed stang.We also left my SCT tuned chip in place,and put the stock H pipe back on.
Now i'm good for another 2 years!!!!!
the readings are as follows....
at 40 km/h...
HC ppm limit is 52,and we got 13
CO% limit is 0.29,and we get 0.00
NO ppm limit is 0385,and we get 3
for the curb idle...
HC ppm limit is 150,and we get 11
CO% limit is 0.7,and we get 0.69....Talk about close call on this one!!!!!!
Not bad for a cammed stang.We also left my SCT tuned chip in place,and put the stock H pipe back on.
Now i'm good for another 2 years!!!!!
Last edited by 1low03gt; 06-19-2010 at 10:20 PM.
#7
Yeah it sucks living where we have to e test,but some good news sort of.My buddy was telling me that soon it will be just a plug in in to the OBDII,and no longer on the rollers. This way once it is plugged into the computer,it goes threw a series of tests to make sure everything is working,or something to that effect.It's been done in some places in the states for sometime now,and works great for them.
#10
Great numbers man - congratulations. Better numbers than some bone stock vehicles for sure. I think there was a slight typo on your CO% limit though, one decimal place off, (.069? as opposed to .69), but no problem, I get what you mean.
Last edited by 1low03gt; 06-19-2010 at 10:22 PM. Reason: Wrong edit....