need help with stereo ?
#1
need help with stereo ?
Hey there, just got an new unit to put in my 95 stang and it had the mach 460 in it. How do i hook up the amps and speakers. replaced with pioneer DEH-P3000IB and it has the amp plugin but they are RCA. any thing would be helpful. thanks
#3
all you need is to find the proper harness. they do sell them. just gotta search. I have a sticky with a lot of what you need in it for info on SN95's
https://www.cmoc.ca/forums/t10941/
mod please move to the right section
https://www.cmoc.ca/forums/t10941/
mod please move to the right section
#5
Go to WALMART, or Canadian Tire and buy a cheater plug!
Wire the cheater plug to the aftermarket deck plug, and then it becomes a plug and play application very simple, and everything works proper when finished!
Do not cut any of your factory plugs or wires.
Wire the cheater plug to the aftermarket deck plug, and then it becomes a plug and play application very simple, and everything works proper when finished!
Do not cut any of your factory plugs or wires.
#6
^^^thats what I did, I bought the regular Ford harness, and then there is another one for the amps. Hooked them both up and worked like a charm! And cost me half of the metra harness. Just make sure you put a 1k ohm resistor in the remote wire, or you'l get a nasty popping sound every time you turn the radio on. Something about the aftermarket sends 12V to the amp where the OEM HU only send 6V
#7
^^^thats what I did, I bought the regular Ford harness, and then there is another one for the amps. Hooked them both up and worked like a charm! And cost me half of the metra harness. Just make sure you put a 1k ohm resistor in the remote wire, or you'l get a nasty popping sound every time you turn the radio on. Something about the aftermarket sends 12V to the amp where the OEM HU only send 6V
this is going to be my #1 mod for 09' that drove me nuts and it only did it once in awhile!
#9
haha, yep. It can get quite annoying. I had to put one in mine, it was popping every time, and loud too. Glad I could help
Thread
Thread Starter
Forum
Replies
Last Post
emcleasing
General Mustang Tech & Chat
11
10-18-2006 08:10 PM