Hello from B.C Canada
06-03-2008, 07:16 PM
#1
CMOC Newbie
Thread Starter
Join Date: Jun 2008
Location: Maple Ridge B.C Canada
Posts: 3
Hello from B.C Canada
Hi there; my names Darren, i live in British Columbia Canada. I currently dont onw a mustang but hope to have a 90-93 mustang foxbody notchback by the end of this summer. It will be a 500hp project car. Just thought i would stop in and say hi and see who else lives out in B.C
Hey another BCer Welcome to the site. Please post alot of pic of you new ride when you get it.
as I would know.
06-03-2008, 10:57 PM
#4
CMOC Newbie
Thread Starter
Join Date: Jun 2008
Location: Maple Ridge B.C Canada
Posts: 3
Yea im going to start off driving it for a bit stock, get used to the feel of the car. Then add either a 306 or a 347 stroker, leave it N/A for a bit, get used to that, then add a vortech S/C to it.
What would you guys recommend for a motor? 306 or 347? Im happy if i get over 500hp. As long as it runs on pump gas, has room for a/c and power steering with good street manners as this wont be a full out track car. It will be a weekend cruiser that will visit some open track nights.
What would you guys recommend for a motor? 306 or 347? Im happy if i get over 500hp. As long as it runs on pump gas, has room for a/c and power steering with good street manners as this wont be a full out track car. It will be a weekend cruiser that will visit some open track nights.
06-03-2008, 11:02 PM
#5
Well im running a 302 stock block, (NOT BORED) with forged internals, custom grind cam, edelbrock heads and intakes, 1.7 rockers, fuel injected with upgraded fuel system, AND A/C & Smog pump, D1sc Procharger running 10PSI and mine was dynoed at 511 to the wheels.
Thread
Thread Starter
Forum
Replies
Last Post
