a few results from shannonville.
Well i wasnt going to run, but just could not resist. turned teh FP up a bit to be on the safe side, and this is what happened. first run (not posted) ran a 13.8 with a tube blowing off, and loosing all boost.
here are the rest running my poor man slicks. Both of these runs were against stealthGT..... http://i105.photobucket.com/albums/m.../timeslips.jpg every one else that ran, post up your numbers.thumb: |
NOPE! lol
15.2 with a fucked MAF! JUNK! |
Dam you have huge balls taking that thing down the track! LOL. It should move good once you get the bugs worked out.
|
Most bugs are out just needs a proper tune for the street.
|
Originally Posted by Stang Illusions 5.0L
(Post 85080)
NOPE! lol
15.2 with a fucked MAF! JUNK! |
Originally Posted by mikebones
(Post 85115)
^^^^^blame it on the maf.......lol.....
|
Originally Posted by Stang Illusions 5.0L
(Post 85080)
NOPE! lol
15.2 with a fucked MAF! JUNK! Did you get a code reader for it? |
Originally Posted by White_Snake
(Post 85041)
Well i wasnt going to run, but just could not resist. turned teh FP up a bit to be on the safe side, and this is what happened. first run (not posted) ran a 13.8 with a tube blowing off, and loosing all boost.
here are the rest running my poor man slicks. Both of these runs were against stealthGT..... every one else that ran, post up your numbers.thumb: Your times are very similar to what I got with 419rwhp and roasting the 275/40/17 Nitto 555Rs until mid-3rd gear. |
Originally Posted by Flynnt
(Post 85128)
How much power are you putting down? Were you spinning all the way down the track too?
Your times are very similar to what I got with 419rwhp and roasting the 275/40/17 Nitto 555Rs until mid-3rd gear. i spun quite a bit, but not sure how long. i didn't push it like i did back when it was stock (6K shift Friday night) I will let you know when i get a tune.thumb: |
Originally Posted by White_Snake
(Post 85122)
SO it is the MAF for sure?bashcp:
Did you get a code reader for it? And for some wierd reason it told us that (Bank 2, wasn't getting proper air flow) or something like that! What ever the hell that means??? I thought maybe it was my O2's but they are brand new. WTF would cause improper air flow on the drivers side (Bank 2)??? It makes no sence at all! |
Originally Posted by Stang Illusions 5.0L
(Post 85133)
I went over to Jeffs shop and he has to scanners a MAC and a SNAP-ON we hooked up the Snap-on and cleared the codes.
And for some wierd reason it told us that (Bank 2, wasn't getting proper air flow) or something like that! What ever the hell that means??? I thought maybe it was my O2's but they are brand new. WTF would cause improper air flow on the drivers side (Bank 2)??? It makes no sence at all! It's a slug thing!! firejump: |
Originally Posted by StealthGT
(Post 85155)
It's a slug thing!! firejump:
|
Well when you get back, it wont be long till it is yanked out!
Did you get them to send me all your parts? |
Originally Posted by Stang Illusions 5.0L
(Post 85162)
off with the slug thing!
jk! |
Originally Posted by StealthGT
(Post 85184)
of with the 15's, your making mustangs look bad!firejump:
jk! what a burn! LMAO Damn that was good (+1) When my car is done you better take out more then a tool kit!!!! and be ready....! |
All times are GMT -5. The time now is 12:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands