4.6L 2v Discussion forum for the 4.6L 2v Mustangs

Exhaust/Cats/ETC

Thread Tools
 
Old Jan 12, 2009 | 09:29 AM
  #1  
RYSSBAY's Avatar
Thread Starter
CMOC Rookie
 
Joined: Aug 2008
Posts: 116
From: Nova Scotia
Exhaust/Cats/ETC

Hey;

I am told that the SLP LM2 system (and from what I hear on YT myslef) sounds a lot better with an OR H, which I know isnt legal...

But, I have a buddy of mine that cut out 2 of the 4 cats on his 98 GT

He said it made quite a difference...Especially with sound

Is that legal???Only having half the cats???

The garage only charged him 40 bucks to do it

Let me know what you think

Thanks
Old Jan 12, 2009 | 12:51 PM
  #2  
DTK's Avatar
DTK
CMOC Veteran
iTrader: (1)
 
Joined: Nov 2006
Posts: 461
From: Halifax
I don't know if it is legal or not but tampering with stock emissions equipment is illegal in some jurisdictions. Not sure in N.S.

If you have the LM2 and want it louder you can always leave the stock H alone and just buy 2 LM1 mufflers.
Your system is modular so you can swap out the 2's for 1's in 5 mins. and you will definitely hear those.

You can also just buy a catted H. It will only have 2 cats but they are high flow so you will definitely hear a difference.
Old Jan 13, 2009 | 08:21 PM
  #3  
Stang Illusions 5.0L's Avatar
HELP SUPPORT CMOC. DONATE!
iTrader: (10)
 
Joined: Jul 2006
Posts: 4,271
From: Trenton
Originally Posted by RYSSBAY
Hey;

I am told that the SLP LM2 system (and from what I hear on YT myslef) sounds a lot better with an OR H, which I know isnt legal...

But, I have a buddy of mine that cut out 2 of the 4 cats on his 98 GT

He said it made quite a difference...Especially with sound

Is that legal???Only having half the cats???

The garage only charged him 40 bucks to do it

Let me know what you think

Thanks
Tampering with Cats YES it is illegal, if a cop were to go under the car and tap on the cats and you would really know the difference right away...$400.00 fine PER cat.

And BTW any Off Road mid section IS illegal, not really that I care cause I run the Pro Chamber mid section
Old Feb 3, 2009 | 07:19 AM
  #4  
RYSSBAY's Avatar
Thread Starter
CMOC Rookie
 
Joined: Aug 2008
Posts: 116
From: Nova Scotia
What should I get to go with my SLP LM2 system?
X or H?
What brand?
Where is the best place to buy, cheapest etc etc
Old Feb 3, 2009 | 12:55 PM
  #5  
DTK's Avatar
DTK
CMOC Veteran
iTrader: (1)
 
Joined: Nov 2006
Posts: 461
From: Halifax
Personally, I like the H with the SLP catback because it retains a deep muscle car growl.
An X raises the pitch alot more.

It is simply a matter of opinion and depends on the sound you like.....HP increases maybe 2-3 with an X versus the H so it's no big deal.

A BBK midpipe is a decent price and decent quality.

If you are going with long tube headers down the road then you could get an SLP catted X pipe.
It is more money but it allows you to use it for stock manifolds and if you ever go with long tubes you can remove the extensions and use it on the headers......this will save you from ever having to buy a new midpipe..thus saving a few bucks.

Don't know if you can get either locally for a decent price but I usually buy that kind of stuff from American Muscle. Try some of the vendors here too.

Check on the net for soundclips so you can get a better idea of what the x and h soundlike with the lm2 to avoid disappointment.
Old May 26, 2009 | 01:00 PM
  #6  
2v_takeover's Avatar
CMOC Rookie
 
Joined: Jul 2008
Posts: 127
From: Saskatchewan
Uncatted H-pipe is awesome. I know it isnt exactly acceptable everywhere but I have the stock muffs with OR H-pipe and hola. The car actually sounds good for stock mufflers.
Old May 26, 2009 | 01:22 PM
  #7  
Stang Illusions 5.0L's Avatar
HELP SUPPORT CMOC. DONATE!
iTrader: (10)
 
Joined: Jul 2006
Posts: 4,271
From: Trenton
You could argue on this all day really...
Personally myself I use the Prochamber, I would have to say I like the H pipe better.
Good luck on your choice!

I agree with you the SLP is bad ***!
Old Jul 7, 2009 | 08:51 AM
  #8  
RYSSBAY's Avatar
Thread Starter
CMOC Rookie
 
Joined: Aug 2008
Posts: 116
From: Nova Scotia
i dont know what to do
I have a feeling that the cats on my stock H could be clogged up and robbing me on power
I wonder how hard it is to beat the guts out of them and weld them back on????
OR
I might just go with the Magnaflow Catted X...$580CAN included extensions (O2), taxes and shipping
OR
An offroad XorH pipe...But then I would be always nervous about running into one of the road checks...hey had one in the next town over a few weeks ago with the mobile lift and they were checking under random cars and trucks...

Yeh I probably am not going to go with an OR XorH haha
Old Jul 7, 2009 | 08:55 AM
  #9  
RYSSBAY's Avatar
Thread Starter
CMOC Rookie
 
Joined: Aug 2008
Posts: 116
From: Nova Scotia
whats the diameter of the pipe on the stock h?
Old Jul 7, 2009 | 12:49 PM
  #10  
Stang Illusions 5.0L's Avatar
HELP SUPPORT CMOC. DONATE!
iTrader: (10)
 
Joined: Jul 2006
Posts: 4,271
From: Trenton
I think its 2.25" or maybe 2.50"

Long tube headers, Prochamber mid section, and a SLP LM2 cat back....oh my that would be the baddest off them all
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Zexhuffer
Mustang Parts for sale
0
Dec 29, 2007 09:10 PM
bombdigitty
5.0L
8
Jul 4, 2006 04:51 PM
Zexhuffer
Mustangs for sale
3
May 3, 2005 08:53 PM
jimc2
Mustang Related Want To Buy
4
Mar 31, 2005 10:32 AM
02gt
General Mustang Tech & Chat
9
Jan 30, 2005 05:54 AM




All times are GMT -5. The time now is 03:02 AM.