|
Originally Posted by Stang Illusions 5.0L
(Post 100296)
Yes there is a stick on the drivers door or door jam at the very bottom there will be 2 letters AX = Axle, under it will be like a Z or some letter.
Have a look at this page I think it might come in handy for you. You can decode your VIN and find out what gears you have by looking at the fallowing. Hope this helps. |
|
No Problem, but does the site work for a 90 mustang? Couldn't find information that goes back that far on the site.
|
Originally Posted by fast Ed
(Post 100264)
Should be either 3.45 or 3.73. If you get the axle code off the VIN sticker on the driver's door, you can tell from that ... post it up here and I will check the parts catalogue, or just Google it. :)
the axle vin if "F", can you tell me what the gears are in the rear end Thanks |
According to the site Stang Illusions 5.0L posted, F= 3.45. Which is kind of puzzeling, because I thought automatics only came with 3.73's...
|
Are those gears for a 2.3L (4 cyl.) or for a 5.0 (V8)?
Thanks again |
Either or... The RPO code for the gears will be the same regardless.
|
i would do a 8.8 v8 rear end swap with a 3.73:1 gearing in it thats wat im running in my 2.3L turbo and it dosn;t reve n/e hire or decreade in fuel ecnomy
|
Originally Posted by brattstanger91
(Post 103528)
i would do a 8.8 v8 rear end swap with a 3.73:1 gearing in it thats wat im running in my 2.3L turbo and it dosn;t reve n/e hire or decreade in fuel ecnomy
|
o hell ya it gets up to speed way faster that it use to but
iv also add the turbo at the same time so im not to sure on that one with the stock n/a 2.3L but i admation it would also IT'S POSI!!!! |
| All times are GMT -5. The time now is 01:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands