Thinkin of CAMS?
heres some helpfull info i found on another site about selecting a camshaft for your ride
http://forums.hybridz.org/showthread.php?t=102280 Enjoy its a long read but worth it! |
goodpost: rockon: thumb:
|
Some good info in there, people always go for the biggest cam they can, which sometimes can cost power and almost always costs driveability, the "right" cam gives you the best of both worlds.
|
Originally Posted by Ponyryd
(Post 72238)
Some good info in there, people always go for the biggest cam they can, which sometimes can cost power and almost always costs driveability, the "right" cam gives you the best of both worlds.
|
Nice find!
When i was deciding on cams for mine,i did a lot of search,and reading on Modular Depot,a site deticated strictly to modular fords. Plus i talked to Scott@VTEngines of VT engines that specialize in modular fords aswell.I was originally gonna go with comp cams,but VT's seemed to be what i was looking for in the end.Proven dyno graphs,and #'s were available over at Modular Depot. thumb: |
ive been doing alot of research in choosing the right cams for mine so far im still torn between VT stage 2 or comp 278 some good tail pipe vids on youtube
but the specs gotta be right for what i want to do thumb: |
maybe i'll add it over in the reference section, nice find thanks for sharing
|
YA good find! THis is my first post WHOOO! I got a 2002 mustang gt with 35000km on it. Anyways im thinking of either buying comp cams 268 since its inbetween a stage 1 and stage two of vt. It was a good rpm range of 1600-5600 and lift is .5 so i wouldnt have to worry about clearance, and with that i would get my heads ported to a stage two to fit the 268 cams better. BUt ive been recently looking at used prochargers for around 3500 anyways if anyone has a deal on aprocharger let me know but what do you think should i do? Labour would be cheap my uncle has his own shop. I also just put on magnoflow exhaust, throttle body, cai and a short throw last month in my garage so if that helps. i was also thinking of putting on some 3 73 gears to avoid that low end torque loss. this wont happen till end of april when i save up some more money.
|
Originally Posted by 02gtstang
(Post 74528)
YA good find! THis is my first post WHOOO! I got a 2002 mustang gt with 35000km on it. Anyways im thinking of either buying comp cams 268 since its inbetween a stage 1 and stage two of vt. It was a good rpm range of 1600-5600 and lift is .5 so i wouldnt have to worry about clearance, and with that i would get my heads ported to a stage two to fit the 268 cams better. BUt ive been recently looking at used prochargers for around 3500 anyways if anyone has a deal on aprocharger let me know but what do you think should i do? Labour would be cheap my uncle has his own shop. I also just put on magnoflow exhaust, throttle body, cai and a short throw last month in my garage so if that helps. i was also thinking of putting on some 3 73 gears to avoid that low end torque loss. this wont happen till end of april when i save up some more money.
|
THe specs for the VT stage II N/A cams i found on vtengines.com "Stage 2 cams are the perfect choice for ported heads and all out N/A street/strip performance. MUST BE USED WITH AFTERMARKET VALVESPRINGS. Aggressive idle. 3000-6500 prm. Gains of 30-35rwhp are common. Like 3.73 gear or better and 2800+ stall in auto's. MUST BE TUNED AFTER INSTALL. .560/.575 lift, 225/235 .050" duration, 108 LSA"
|
All times are GMT -5. The time now is 01:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands